News

12 December 2012

TCN in media: Read the article about 'Ethernet in Vehicles' in Automotive Sweden, follow link to English, follow link to article in Swedish,

30 October 2012

Welcome to speech  "After 40 years, Ethernet at last in vehicles" @ Embedded Gothenburg Nov 21 2012.

14 September 2012

Customer case 'Ethernet and Functional Integration in Steer-By-Wire Solution' now available for download.

Read more

3 September 2012

Continental Automotive call it the Ethernet week. Do schedule a meeting with TCN in Munich or Regensburg, September 17 to 21. Mon/Tue are OPEN meetings in Munich, Wed/Thu are the Ethernet & IP @ Automotive Technology Days.

Link to Ethernet & IP @ Automotive Technology Days

18 July 2012

Time Critical Networks will partipate in the "Challenges in methodology, representation, and tooling for automotive embedded systems", an International FP7 & ITEA2 Workshop (TIMMO-2-USE, MAENAD, SAFE and AMALTHEA) @ Hotel Angleterre (Sept 24/25) in Berlin.

Link to program  

11 May 2012

Do not miss the interesting article about Ethernet in Automotive, link to article Ethernet finds its place in automotive, link to pdf: Dropbox public link. Approved by Automotive Design to share this information.

Read pdf

9 May 2012

Short description of Time Critical Networks and it's unique technology for using switched Ethernet for time-dependant applications is now available at Slideshare.

Read more

26 April 2012

Time Critical Netorks is running a round-table discussion about Automotive Ethernet at the conference In-vehicle Electronics (Elektronik i Fordon in Swedish) in Gothenburg, Sweden.

Read more

24 April 2012

Today's presentation at SAE 2012 World Congress available at Slideshare.

Read more

21 April 2012

Technical Papers from SAE 2012 World Congress now available! Link to technical paper: 'Guaranteeing Hard Real-Time Requirements of In-Vehicle Multihop Communication Over Ethernet'.

2 April 2012

Time Critical Networks (TCN) signed agreement with OPEN Alliance, which is a jointly developed special interest group (SIG) that encourages wide scale adoption of Ethernet-based, single-pair unshielded networks as the standard in automotive applications. TCN will focus in contributing to the Technical Committee 4 - Ethernet Tools. For more information visit www.opensig.org

1 March 2012

Meet Time Critical Networks at SAE World Congress in Detroit April 24-26, 2012. Do listen to the presentation of the technical paper "In-Vehicle Multihop Communication Over Ethernet Network" April 24 @ 1:20 PM. 

Link to event: SAE World Congress

Link to technical paper: 'Guaranteeing Hard Real-Time Requirements of In-Vehicle Multihop Communication Over Ethernet'

Schedule a meeting in Detroit by contacting CEO Lars Brohne:  lars.brohne@timecriticalnetworks.com

14 February 2012

Time Critical Networks (TCN) signed a partner agreement with ArcCore, leading provider of open source AUTOSAR embedded software Arctic Core and Arctic Studio. TCN and ArcCore both share the objective that the Clients (End-customers) shall be able to design, analyze, optimize and test cost-effective – among other things - in-vehicle communication solutions and systems, with particular focus on calculating end-to-end latency, real-time constrains and ECU task scheduling.

Please visit ArcCore at arccore.com

31 January 2012

Meet Time Critical Networks at ERTS 2012 in Toulouse and Embedded World in Nuremberg. Schedule a meeting by contacting Jörgen Olsson:  jorgen.olsson@timecriticalnetworks.com

13 July 2011

CPAC Systems, together with Time Critical Networks, finish today a joint Thesis Project, aiming to check the feasability of replacing CAN with standard Ethernet.

The purpose of the thesis project was to investigate the possibility of replacing the CAN bus with Ethernet according to the following requirements:
  • Standard off-the-shelf components and software stacks
  • No modification of the network node application software, i.e. messages formatted according to CAN protocols must be transferred by means of Ethernet.
A unique approach to this issue is offered as a result of the work done by Time Critical Networks. Their tool makes it possible to calculate the maximum forwarding time of a frame in an Ethernet network. This tool may make it possible to validate the use of Ethernet for time-critical applications.

CPAC Systems, a company in the Volvo group which develops and manufactures steer-by-wire systems based on the CAN technology, wishes to verify whether Ethernet could now be considered as a solution to complement or replace CAN, thus overcoming limitations of CAN. This verification was the goal of this master thesis project.

Please do contact us for further information about the master thesis project, such as the report.

10 May 2011

Time Critical Networks, sign an agreement with a pan-European automotive consortia of in total 17 companies and organisations. The TIMMO-2-USE project objective is on time-critical in-vehicle communication systems, such as brake-by-wire, steer-by-wire, etc. The TIMMO-2-USE project aims at increasing the efficiency and accuracy in handling timing-related issues in the complex development of automotive real-time embedded systems. The objective is to master different types of timing constraints and dynamic behavior throughout the different steps of the EAST-ADL/AUTOSAR-based development process and tool chain.

TIMMO-2-USE is an ITEA2 project (ITEA 2 project 09033) with 17 partners from France, Germany, Sweden, and United Kingdom. The project started in October 2010 and has a duration of 2 years.

More information is found at: www.timmo-2-use.org

18 January 2011

Time Critical Networks has been selected as a presenter and a publisher of SAE 2011 World Congress & Exhibition Technical Papers. The presentation is scheduled to be held April 14, 2011, in Cobo Center, Detroit, Michigan, USA, under session AE305, "In-Vehicle Networks".

Link to event: SAE World Congress

Link to technical paper: 'Guaranteeing Hard Real-Time Requirements of In-Vehicle Multihop Communication Over COTS Ethernet Hardware'

Schedule a meeting in Detroit by contacting CEO Lars Brohne:  lars.brohne@timecriticalnetworks.com 

9 December 2010

Time Critical Networks has been selected as a finalist in the ICT Category, for the 2011 Academic Enterprise Awards. TCN has been selected by groups from Swiss Federal Institute of Technology Zurich (ETH Zurich) and the University of Cambridge among leading entrepreneurs and spin-out companies chosen to go through to the finals on 3 February in Zurich of the only pan-European awards for university researchers who start businesses.

TCN joins 17 other finalists from a broad range of European universities to compete for top prizes in the ACES Academic Enterprise Awards, the only pan-European programme to recognize entrepreneurship at academic institutions. TCN is competing for the ICT prize for top information and communications technology entrepreneurs at academic institutions, one amongst three finalists.

More information about the 2011 Academic Enterprise Awards: www.sciencebusiness.net/aces/

5 October 2010

Time Critical Networks has appointed the Research & Development (R&D) Director of CPAC Systems (a company developing and manufacturing X-by-wire, safety critical systems for marine and automotive applications), Marco Monzani, as its second independent board member.

"If it's about connectivity, then Time Critical Networks is one of the most interesting initiatives in the region. Think of how Ethernet technology jumped over its traditional boundaries, it is immediate to realize the value of the job Time Critical Network is doing." said Marco Monzani, R&D Director of CPAC Systems.

Marco brings with him about 20 years of experience of product development within automotive, marine and medical segments.

"We are delighted to have Marco join our Board. He is a tremendous addition to our company given his insights and experience," said Lars Bröhne, CEO of Time Critical Networks. "Our leadership team look forward to working with Marco as we shape our technology and execute our strategies for enabling customers to use standard Ethernet in time critical applications."

Marco is the second independent member on the six-strong board after Time Critical Networks appointed Patric Nordström, CEO of Idevio (www.idevio.com), to its board earlier this year.

1 September 2010

Lars Bröhne has been appointed as the new Chief Executive Officer (CEO), Time Critical Networks, with effect from 1 September 2010. Based at headquarters in Gothenburg, he replaces Babak Esfahani, who has been appointed CEO of Plejd AB.

"I am delighted to take up this new role and look forward to developing the business for this technology breakthrough in standard Ethernet. I am also very grateful for the fantastic work of Babak and that he decided to continue with us in the Scientific Advisory Board."

Lars brings with him over 20 years' experience in Computer Software Engineering from companies such as Ericsson Hewlett-Packard Telecommunications and Intec.  Lars's most recent appointment was Software Director of Nobel Biocare, developing a market leading dental CAD software.

8 April 2010

Time Critical Networks is expanding and looking for qualified board members.

Read more (in Swedish)

30 March 2010

In tough competition Time Critical Networks is granted Vinnovas popular R&D grant 'Forska&Väx 2010' ('Research& Grow 2010') award.

22 December 2009

Time Critical Networks initiates pilot project with Westermo Data Communications a leading actor in the field of Industrial Ethernet.

15 May 2009

Time Critical Networks attracts Venture Capital.

20 April 2009

Time Critical Networks is nominated top ten startup in Venture Cup region finals.

10 April 2009

Time Critical Networks is filing an international application / Patent Cooperation Treaty (PCT) application.

7 April 2009

Time Critical Networks is accepted in the main incubator at Chalmers Innovation 

30 October 2008

Time Critical Networks is awarded 'VINN NU' ('Win Now') as one of ten most promising early research based Swedish startup by Vinnova.

27 June 2008

Time Critical Networks joins other innovative startups in Chalmers Innovations pre-incubator.

10 April 2007

Filing of Provisional Patent Application.

 
News